The NEW yne3-rx allows you to use ANY Canon compatible TTL capable speedlight with the Canon or Yongnuo 600ex-rt system. It will allow you to control all Canon Compatible speedlights using the YN-E3-RT controller.....in short... this is an amazing system that is not available anywhere else... Only from Yongnuo... And ME!
Specs -
The product should be used with the compatible master unit(transmitter), this manual is assumes that it is being used with the YN-E3-RT as the transmitter, concerning the settings and operation of the transmitter, please refer to the user manual.
1.Supports flash mode: E-TTL, M, Multi
2.Supports remote shutter release function, test flash
3.Supports PC output interface
4.Supports USB firmware upgrade
5.Supports single contact triggering
6.Supports single contact flash triggering
7.LCD Display
Type: | Wireless flash receiver |
Distance: | 100M |
Channel: | Auto, Ch.1-15 |
Frequency: | 2405-2475Mhz |
Groups: | 5 groups(A/B/C/D/E) |
Wireless Radio ID: | 0000-9999 |
USB firmware upgrade: | Support |
Compatible Battery: | AA*2(Supports 1.2V rechargeable batteries) |
Working time: | 24 hours |
Size: | 92.5*50*37mm |
Suit for:
The compatible transmitter(master unit):
YN-E3-RT/YN600EX-RT/ST-E3-RT/Canon 600EX-RT
Parts of the compatible E-TTL flash list:
Canon 600EX(RT)/580EX II/430EX II
Yongnuo YN568EX(II)/YN565C/YN468C(II)/YN467C(II)/YN465C